Products
Our Recent products
steel bridges
Open web girders/ truss bridges
Fabrication and launching of Open web girders/Truss Bridges which are used for track bridges over large rivers and valleys.
bow string girders
Fabrication and launching of Bow String Girders which are unique in construction as it is designed for carrying string girder where it is possible to restrict the height of girder.
composite plate girders
Fabrication and launching of composite girders for road over bridges & rail bridges.
f.o.b
Fabrication and launching of Foot Over Bridges (a pedestrian bridge, pedestrian overpass, or pedestrian overcrossing) for developing transportation, and its infrastructure to meet the needs of the growing population.
bridge bearing
METALLIC GUIDED BEARING
These bearings consists of a sliding assembly with restraint along a desired direction to bear and transmit horizontal force and are capable of allowing movements in the direction perpendicular to the direction of horizontal force.
pin bearing
These bearing consists of a metal pin provided within a metal cylinder to bear & transmit horizontal forces along any direction in the horizontal plane and accommodating the rotation about any axis in Horizontal Plane.
elastomeric bearing
Laminated Rubber Bearing is composed of a multilayer stiffening plate, and steel plate all wrapped in the rubber elastic material inside and outside. The bearing has enough vertical stiffness to withstand the bridge’s internal force, and can be reliably transmitted to the pier.
pot ptfe bearing
RKC SYSTEM OF POT – PTFE BEARINGS are coexisting combination of vertical loads, horizontal loads, and translations longitudinal and / or transversely, together with varying requirements of rotational capacity, are such that all POT-CUM PTFE bearings are customized designed and manufactured as being project specified.
rocker cum roller bearing
These type of bearings consists of rollers sandwiched between a saddle plate and a bottom plate. These bearings offer longitudinal movement through rollers which roll along guide bars attached to saddle plate and bottom plate. Rotational movement is through a rocker pin which gives a see-saw rocking motion to the top plate.
spherical bearing
The spherical bridge bearing has a high-strength steel body and is designed for high vertical, horizontal and lateral loads, and where large rotational structural displacements need to be accommodated.
expansion joints
strip seal expansion joint
Strip seals have successful performance records over several years. We use monolithic edge beam, so the stability and life of the product increases and also we use tough neoprene rubber as water barrier in the gap which has a very high life time.
compression seal expansion joint
It consists of steel armoured nosing at two edges of the joint gap suitably anchored to the deck concrete and a performed chloroprene elastomer compressed and fixed into the joint gap with special adhesive girder.